Density Functional Theory Study Research Articles

Tuning Properties of Layered Materials Based on Hexagonal Boron Nitride by Methylation: A Density Functional Theory Study.

In this work, the rational design of optoelectronic properties of two-dimensional materials based on hexagonal boron nitride (h-BN) by functionalization by methyl (CH3) groups is proposed. Using density functional theory, we examine the functionalization of single- or double-layer systems with either CH3 radicals alone or with both CH3 (cations) and chlorine (anions), i. e., under conditions of homolytic or heterolytic splitting of CH3Cl precursor molecules, respectively. Different degrees of methylation (coverages) are considered. The methylation of pure h-BN leads to a reduction of the band gap, while in h-BN/G heterostructures (with methylated graphene layer), methylation increases the band gap. As a consequence, h-BN/G heterostructures offer a high tunability of their optoelectronic properties. To guide possible experiments, vibrational properties and spectra of methylated h-BN and methylated h-BN/G are determined.

Synthesis and Characterization of Zn(II) Complex of 4-chloro-2-(((2-phenoxyphenyl)imino)methyl)phenol and its Biological Efficacies: DNA Interaction, ADMET, DFT and Molecular Docking Study.

Condensing 2-phenoxyaniline with 5-chlorosalicyldehyde under reflux conditions, a 4-chloro-2-(((2-phenoxyphenyl)imino)methyl)phenol Schiff base has been Synthesized. A zinc complex was synthesized by combining the ligand in a 1:1 molar ratio with zinc sulphateheptahydrate. Mass spectroscopy, NMR, infrared, and elemental analysis were used to characterize the ligand and zinc complex. By measuring the molar conductance, the non-electrolytic character of the complex was confirmed. The zinc ion is coordinated in a pentadentate manner, according to an IR and NMR investigation. Viscosity measurements, absorption and fluorescence spectroscopy were utilized to examine the complex's interaction with CT (calf thymus) DNA. Furthermore, the ligand and complex's ADMET characteristics were ascertained through the use of ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) study. Calculation of the different electronic parameters of the optimized structure through Density Functional Theory (DFT) indicated the stability of the Zn(II) complex. Molecular docking study reflected the future opportunity for the consideration of Zn(II) complex to fight against Alzheimer and Glaucoma diseases.

Selective Synthesis of Functionalized 3(2H)‐Furanones via Tandem Michael Addition/Rearrangement/Cyclization Reaction of Aliphatic Alkynones: A Combined Experimental and Theoretical Study

AbstractA novel catalyst‐ and solvent‐controlled dimerization of aliphatic alkynones through tandem Michael addition/rearrangement/cyclization sequence has been developed. The elaborated protocol provides a convenient chemo‐, regio‐ and stereoselective access to rare 3(2H)‐furanones decorated with 2‐exo‐methylene and 4‐ethenyl functionalities. A comprehensive density functional theory (DFT) study of possible reaction mechanism including ab initio molecular dynamics (AIMD) simulations and quantum theory of atoms in molecules (QTAIM) analysis of various substrate/catalyst/solvent complexes has revealed the Janus‐like behavior of the employed sodium tert‐butoxide/toluene system that is responsible both for the chemoselectivity of the initial addition step and the inhibition of the final cyclization step.

Anti‐Biofilm and Anti‐Virulence Potential of 2‐Amino‐1,3,4‐Thiadiazole Derivatives

AbstractBiofilms are microbial communities that facilitate the pathogenesis of life‐threatening microbial infections through the glazing of mucosal surfaces or implanted devices thus protecting them from medications and increasing mortality rates. To discover a new class of antibiofilm agents 2‐amino‐1,3,4 thiadiazoles hybridized with pharmacologically active heterocycles were designed and synthesized. The compounds were characterized by infrared, nuclear magnetic resonance, mass spectroscopy and elemental analysis. All the compounds were assessed for their anti‐biofilm and anti‐virulence activity against P. aeruginosa and S. aureus. Quinoline‐substituted thiadiazoles were found to possess potent anti‐biofilm activity against P. aeruginosa and S. aureus. The molecular docking analysis further confirms the antibiofilm potential of the compounds. Density functional theory studies were carried out to investigate the electronic and molecular properties of the most active hybrids.

Highly efficient donor-acceptor configurated Nicotinaldehyde-based small molecules for NLO materials: Base-free deformylation and DFT study

In the current study, 6-methyl nicotinaldehyde derivatives (MNP-BTMP) were synthesized by using the Suzuki- cross-coupling method which involved deformylation approach. The FTIR, UV–Visible, 1HNMR and 13CNMR spectroscopic analyses were performed to validate the structures of newly synthesized derivatives. Additionally, the density functional theory (DFT) approach at M06/6–311G(d,p) level was utilized in order to calculate their optoelectronic and nonlinear optical (NLO) properties. Consequently, their HOMO-LUMO band gaps (Egap) were obtained in the range of 4.77–5.55 eV. A significant charge transfer from HOMO towards LUMO was investigated which was further supported by DOS. Moreover, they exhibited the maximum absorption wavelengths (λmax) in the UV- Vis region as 269.989–303.496 nm. Among the derivatives, BTMP was found with the least energy gap (4.77 eV) and the red-shifted absorption spectra (λmax =303.496 nm) as compared to other derivatives. Owing to these unique properties, BTMP was also found with significant linear polarizability ⟨α⟩ and hyperpolarizability (βtot and γtot) values i.e., 2.816×10−23, 1.855 × 10−30 and 4.553 × 10−35esu., respectively among the titled compounds. These findings indicated the potential use of these organic derivatives in the NLO applications.

Density functional theory study of the structure, stability, magnetic properties, and (hyper)polarizability of (sub-nm) rare-earth (RE) doped gold clusters: Au5RE with RE = Sc, Y, La-Lu.

Rare-earth doped materials are of immense interest for their potential applications in linear and nonlinear photonics. There is also intense interest in sub-nanometer gold clusters due to their enhanced stability and unique optical, magnetic, and catalytic properties. To leverage their emergent properties, here we report a systematic study of the geometries, stability, electronic, magnetic, and linear and nonlinear optical properties of Au5RE (RE = Sc, Y, La-Lu) clusters using density-functional theory. Several low-energy isomers consisting of planar or non-planar configurations are identified. For most doped clusters, the non-planar configuration is energetically favored. In the case of La-, Pm-, Gd-, and Ho-doped clusters, a competition between planar and non-planar isomers is predicted. A distinct preference for the planar configuration is predicted for Au5Eu, Au5Sm, Au5Tb, Au5Tm, and Au5Yb. The distinction between the planar and non-planar configurations is highlighted by the calculated highest frequencies, with the stretching mode of the non-planar configuration predicted to be stiffer than the planar configuration. The bonding analysis reveals the dominance of the RE-d orbitals in the formation of frontier molecular orbitals, which, in turn, facilitates retaining the magnetic characteristics governed by RE-f orbitals, preventing spin-quenching of rare earths in the doped clusters. In addition, the doped clusters exhibit small energy gaps between frontier orbitals, large dipole moments, and enhanced hyperpolarizability compared to the host cluster.

Gold-Catalyzed Oxidation Reactions of Thioalkynes with Quinoline N-Oxides: A DFT Study.

Mechanistic investigation of the gold-catalyzed oxidative reactions of thioalkynes with quinoline N-oxides was performed using density functional theory (DFT) calculations. For the oxidative rearrangement of thioalkynes with quinoline N-oxide to yield the same products, the Cβ-oxidation of thioalkynes was predicted to be competitive with Cα-oxidation, with the Cβ-oxidative process slightly more favorable. However, for the oxidative alkenylation of propargyl aryl thioethers with quinoline N-oxides, the Cβ-oxidation of thioether by quinoline N-oxide generated the product 3-hydroxy-1-alkylidene phenylthiopropan-2-one. Moreover, the ring opening of the four-membered sulfonium intermediate was achieved by the nucleophilic attack of quinoline N-oxide rather than a water molecule.

Design of New Schiff Bases and Their Heavy Metal Ion Complexes for Environmental Applications: A Molecular Dynamics and Density Function Theory Study

Schiff bases (SBs) are important ligands in coordination chemistry due to their unique structural properties. Their ability to form complexes with metal ions has been exploited for the environmental detection of emerging water contaminants. In this work, we evaluated the complexation ability of three newly proposed SBs, 1–3, by complete conformational analysis, using a combination of Molecular Dynamics and Density Functional Theory studies, to understand their ability to coordinate toxic heavy metal (HMs) ions. From this study, it emerges that all the ligands present geometries that make them suitable to complex HMs through the N-imino moieties or, in the case of 3, with the support of the oxygen atoms of the ethylene diether chain. In particular, this ligand shows the most promising coordination behavior, particularly with Pb2+.

Photocatalytic activity enhancement of two-step and one-pot synthesis of Pd/ZnO nanocomposites: an experimental and DFT study.

Pd/ZnO nanocomposites were successfully synthesized by means of one and two pot synthesis and applied in the photodegradation of Rh6G. The nanocomposites were characterized by XRD, SEM, TEM, FTIR and micro-Raman spectroscopies. It was found the presence of PdZn2, PdO and agglomerated particles in the support surface for the Palladium-based nanocomposites fabricated by one-pot route; the two-step method allowed the formation of spherical Pd nanoparticles, with homogeneous distribution in the nanocomposite matrix, with an average size of 2.16nm. The results show higher photocatalytic efficiency for the samples fabricated under the two-step approach compared to the one-pot synthesis. Based on experimental results, density functional theory (DFT) calculations were carried out to understand the enhancement photocatalytic of Pd/ZnO nanocomposites. To achieve it, the ZnO (001) and (101) surfaces were built and decorated by different Pd coverages. The theoretical results indicated two different photocatalytic mechanisms. In ZnO (001) case, the electrons flowed from surface to Pd, generating the superoxide radical anion (⋅O2-). Furthermore, the density of states of the ZnO (001) surface was modified by impurity Pd-d states at proximity to the conduction states, which may work as electron acceptors states. On the other hand, we found that the electrons flow from Pd to ZnO (101) surface, inducing the formation of ⋅OH and ⋅O2- for the degradation of Rh6G. The density of states of the ZnO (101) revealed a reduction in its bandgap, due to Pd-d states localized above valence states. Hence, our theoretical results suggest that the Pd-d states may facilitate the mobility of electrons and holes in (001) and (101) surfaces, respectively, reducing the rate of charge recombination.

Photocatalytic Efficiency for CO2 Reduction of Co and Cluster Co2O2 Supported on g-C3N4: A Density Functional Theory and Machine Learning Study.

It is well known from experimental results that a single atom of cobalt supported on g-C3N4 is an efficient photocatalyst for the reduction of CO2 to CO, with a better photocatalytic activity than g-C3N4. In this work, we investigate the performance as catalysts for the CO2 reduction of single atoms of cobalt and Co2O2 clusters supported on graphitic carbon nitride (g-C3N4). Employing density functional theory plus Hubbard (DFT + U) calculations, we investigate in detail the reduction mechanisms to CO and HCOOH for the first time. We find that deposition of cobalt on g-C3N4 decreases the work function of g-C3N4 to 6.6 eV and provides a better candidate for the reduction reaction. In addition, we find that the preferred product of CO2 reduction on Co@g-C3N4 is CO, with a rate-determining barrier of 0.97 eV, while on Co2O2@g-C3N4, CO2 reduces to formate with a rate-determining barrier of 0.44 eV. We determine the creation of CO2 from COOH to only take place on Co2O2@g-C3N4, with a (relatively high) barrier of 2.27 eV. In order to obtain more easily the transition state energies of the reactions mentioned above, we applied machine learning methods to search for high-importance descriptors for these quantities, in the case of single transition metal atoms supported on C3N4. Interestingly, our results show that our quantities of interest are closely related to the adsorption energies of products and normalized valence electrons of the products of the elementary reactions as well as those of the metal atoms. The former of these two sets of features can be straightforwardly obtained via DFT, while the latter energies are extensively tabulated. Our results offer guidance for the design of catalysts and photocatalysts for CO2 reduction on single-metal atoms supported on C3N4.

Periodic DFT study of structural transformations of cocrystal CL-20/MMI under high pressure.

The crystal and molecular structure, electronic properties, optical parameters, and elastic properties of a 1:2 hexanitrohexaazaisowurtzitane (CL-20)/2-mercapto-1-methylimidazole (MMI) cocrystal under 0 ~ 100 GPa hydrostatic pressure were calculated. The results show that the cocrystal CL-20/MMI undergoes three structural transitions at 72 GPa, 95 GPa, and 97 GPa, respectively, and the structural transition occurs in the part of the MMI compound. Structural mutations formed new bonds S1-S2, C2-C7, and N1C5 at 72GPa, 95 GPa, and 97 GPa, respectively. Similarly, the formation of new bonds is confirmed on the basis of an analysis of the changes in lattice constants, cell volumes, and partial densities of states (PDOS) for S1, S2, C2, C7, N1, and C3 at the corresponding pressures. The optical parameters show that the pressure makes the peaks of various optical parameters of CL-20/MMI larger, and the optical activity is enhanced. The optical parameters also confirm the structural mutation of CL-20/MMI under the corresponding pressure. CL-20/MMI was calculated by using the first-principles norm-conservative pseudopotential based on density functional theory (DFT) in the CASTEP software package. For the optimization results, the Broyden-Fletcher-Goldfarb-Shanno (BFGS) method is selected to optimize the geometry of the cocrystal in the range of 0-100 GPa. GGA/PBE (Perdew-Burke-Ernzerhof) was selected to relax the cocrystal CL-20/MMI fully without constraints at atmospheric pressure. The sampling scheme in the Brillouin zone [10] is the Monkhorst-Pack scheme, and the number of k-point grids was 2 × 2 × 2. By contrast, this study will use the LDA method to calculate.

Density Functional Theory Study of Polarization-Induced Electron Confinement by Dilute Boron Alloying in ε-Ga2O3 Nanometer-Thick Film for High Electron Mobility Transistor

Density Functional Theory Study of Polarization-Induced Electron Confinement by Dilute Boron Alloying in ε-Ga₂O₃ Nanometer-Thick Film for High Electron Mobility Transistor

Nickel-catalyzed switchable arylative/endo-cyclization of 1,6-enynes

Carbo- and heterocycles are frequently used as crucial scaffolds in natural products, fine chemicals, and biologically and pharmaceutically active compounds. Transition-metal-catalyzed cyclization of 1,6-enynes has emerged as a powerful strategy for constructing functionalized carbo- and heterocycles. Despite significant progress, the regioselectivity of alkyne functionalization is entirely substrate-dependent. And only exo-cyclization/cross-coupling products can be obtained, while endo-selective cyclization/cross-coupling remains elusive and still poses a formidable challenge. In this study, we disclose a nickel-catalyzed switchable arylation/cyclization of 1,6-enynes in which the nature of the ligand dictates the regioselectivity of alkyne arylation, while the electrophilic trapping reagents determine the selectivity of the cyclization mode. Specifically, using a commercially available 1,10-phenanthroline as a ligand facilitates trans-arylation/cyclization to obtain seven-membered ring products, while a 2-naphthyl-substituted bisbox ligand promotes cis-arylation/cyclization to access six-membered ring products. Diastereoselective cyclizations have also been developed for the synthesis of enantioenriched piperidines and azepanes, which are core structural elements of pharmaceuticals and natural products possessing important biological activities. Furthermore, experimental and density functional theory studies reveal that the regioselectivity of the alkyne arylation process is entirely controlled by the steric hindrance of the ligand; the reaction mechanism involves exo-cyclization followed by Dowd-Beckwith-type ring expansion to form endo-cyclization products.

Mechanism and Origins of Enantioselectivity in the Nickel-catalyzed Asymmetric Synthesis of Silicon-Stereogenic Benzosiloles.

As important π-skeletons, benzosiloles often possess unique electronic and optical properties and have been widely used in semiconductor materials. Therefore, great attention has been drawn to the area of developing novel synthetic methods for various benzosiloles. However, the synthesis of enantioenriched silicon-stereogenic benzosiloles is still at an early stage and remains to be explored. Herein, we performed systematic density functional theory studies on the recently reported nickel-catalyzed asymmetric synthesis of silicon-stereogenic benosiloles, which was enabled by an enantioselective desymmetrization of (2-alkenyl)aryl-substituted silacyclobutanes. Our computational study shows that the reaction mechanism involves ligand exchange, oxidative addition, alkene insertion, and hydrogen-transfer coupled reductive-demetalation steps. The proposed transmetalation and β-hydride elimination mechanism was not found, which might be due to the unfavorable ring strain of the multicyclic intermediates. The novel hydrogen-transfer coupled reductive-demetalation mechanism was shown to be reasonable for the generation of the silicon-stereogenic benzosilole. Noncovalent interactions (including C-H···π and hydrogen bonding) in the rate-determining alkene insertion transition state account for the origins of the enantioselectivity. Our computational study sheds light on the detailed reaction mechanism and also provides insights for the development of novel approaches for synthesis of high-value silicon-stereogenic compounds.

Investigating the interplay between charge transfer and CO2 insertion in the adsorption of a NiFe catalyst for CO2 electroreduction on a graphite support through DFT computational approaches.

This article describes a density functional theory (DFT) study to explore a bio-inspired NiFe complex known for its experimental activity in electro-reducing CO2 to CH4 when adsorbed on graphite. The coordination properties of the complex are investigated in isolated form and when physisorbed on a graphene surface. A comparative analysis of DFT approaches for surface modeling is conducted, utilizing either a finite graphene flake or a periodic carbon surface. Results reveal that the finite model effectively preserves all crucial properties. By examining predicted structures arising from CO2 insertion within the mono-reduced NiFe species, whether isolated or adsorbed on the graphene flake, a potential species for subsequent electro-reduction steps is proposed. Notably, the DFT study highlights two positive effects of complex adsorption: facile electron transfers between graphene and the complex, finely regulated by the complex state, and a lowering of the thermodynamic demand for CO2 insertion.

Development of new thiazole‐guanidine complexes as rapid and recoverable catalysts for the synthesis of 6‐piperidin‐dihydro‐thia‐hexaaza‐s‐indacene derivatives supported by DFT studies

In this study, the focus was on synthesizing metal chelates of Fe(III), Ni(II), and Pd(II) using thiazole‐guanidine derivatives. Various spectral and analytical methods were employed to elucidate the structural characteristics and determine the molecular formulae of these metal chelates, including infrared (IR(, 1H‐NMR and 13C‐NMR, ultraviolet–visible (UV–vis), CHN, XRD data, mass spectrometry, thermal conduction, and measures of magnetism, were used to clarify the structures of these compounds. The optimized molecular structures have been scrutinized by the DFT method. Correlation between all spectroscopic methods and DFT calculation revealed an octahedral‐coordinating environment surrounding the Fe3+ ion, [Fe (BTG)2(NO3)2].NO3.2H2O and Ni2+, [Ni (BTG)2(NO3)2].H2O cation and distorted square planner surrounding Pd2+, [Pd (BTG) (COOCH3)2].2H2O cation. The examination of the stability and stoichiometry of complexes in solution using conventional techniques has been incorporated into the investigation's scope. Under mild reaction conditions, the green technique was employed to carry out a condensation reaction for aromatic aldehyde, rhodanine, pipredine, and 5‐aminotetrazol to generate derivatives of 6‐piperidin‐dihydro‐thia‐hexaaza‐s‐indacene derivatives. In comparison to our new complexes, all reaction conditions were optimized for those variable Lewis acid catalysts. In general, tests conducted under high yield, speedy, and environmentally friendly solvent (H2O/EtOH) conditions, the BTGPd catalyst showed superiority over others. Additionally, the hetero‐catalyst recovery proved successful and could be employed with the same efficiency up to six times before the efficiency started to decrease. The effectiveness of this catalytic procedure was validated through a thorough examination using density functional theory (DFT). The DFT analysis showcased the distinctive characteristics of this complex and proposed logical mechanisms that elucidated the crucial physical parameters responsible for the superior catalytic performance of the Pd(II) complex.

Synthesis, anticancer, anti‐inflammatory, antimicrobial activities, molecular docking, and Density functional theory studies of nanometal (IV) glycoconjugates

Oxovanadium (IV) and diphenyltin (IV) complexes were synthesized on the nanoscale based on the Schiff base (H2L) derived from salicylaldehyde and d‐glucosamine. The complexes were formed with a molar ratio of 1:1 and 1:2 (metal: dligand) relative to oxovanadium (IV) and diphenyltin (IV), respectively. Fourier‐transform infrared spectroscopy, 1H and 13C nuclear magnetic resonance, mass fragmentations, electronic transitions, thermogravimetric analysis, and density functional theory were employed to validate the structure of synthesized compounds. The results demonstrated that the ligand (H2L) was successfully attached to oxovanadium (IV) and diphenyltin (IV) as di‐anionic and mono‐anionic ligands, respectively. The size of the complexes was investigated using the transmission scanning microscope. The work presents a prospective concept for the drug design of the targeted anticancer through the glucose moiety. All compounds revealed remarkable anticancer activities against the colorectal (HCT‐116) cell line, recording IC50 values 4.94, 21.73, and 62.5 μg/ml for VO (II)(L), free H2L, and Sn (ph)2(HL)2, respectively. The IC50 value of VO (II)(L) complex was increased after the quercetin inhibitor. Therefore, the sugar‐conjugated compound can be recognized by the glucose recognition binding site of GLUT and their cell‐killing effect depends highly on the GLUT inhibitor, quercetin. The potential GLUT transportability of the compounds was investigated through a molecular docking study. The anti‐migration activity was investigated for VO (II)(L) complex. The free ligand observed the best antimicrobial results. The antibacterial stimulation was investigated and represented different interaction types with the selected ribosyl transferase enzyme.

Comparative first principles investigation on the structural, optoelectronic and vibrational properties of strain-engineered graphene-like AlC3, BC3 and C3N monolayers

Three cardinal two-dimensional semiconductors viz., AlC3, BC3 and C3N, closely resembling the graphene structure, are intriguing contenders for emerging optoelectronic and thermomechanical applications. Starting from a critical stability analysis, this density functional theory study delves into a quantitative assessment of structural, mechanical, electronic, optical, vibrational and thermodynamical properties of these monolayers as a function of biaxial strain (ε) in a sublinear regime (−2%⩽ε⩽4%) of elastic deformation. The structures with cohesive energies slightly smaller than graphene, manifest exceptional mechanical stiffness, flexibility and breaking stress. The mechanical parameters have been deployed to further cultivate acoustic attributes and thermal conductivity. The hexagonal structures with mixed ionic-covalent molecular bonds have indirect electronic band-gap and work-function acutely sensitive to ε . Dispersions of optical dielectric function, energy loss, refractive index, extinction coefficient, reflectivity, absorption coefficient and conductivity are deciphered in the UV–Vis–NIR regime against strain, where particular frequency bands featuring high polarization, dissipation, absorbance or reflectance are identified. Phonon band-structure and density of states testify dynamic stability in the ground state for all systems except the compressed ones. A comprehensive group theoretical analysis is performed to cultivate rotational; infrared and Raman-active modes, and the nature of molecular vibrations is delineated. The red-shifting of phonon bands and E2g/A1g Raman peaks with increasing ε , associates estimation of Grüneisen parameter. Finally, strain-induced alterations of thermodynamic quantities such as entropy, enthalpy, free energy, heat capacity and Debye temperature are studied, followed by a molecular dynamics-based stability assessment under canonical ensemble.

A DFT and catalytic studies of recyclable chitosan based heterogeneous Cu(II) catalyst for the oxidation of tetralin

The oxidation of hydrocarbons is an essential transformation for converting petroleum-based raw material into useful chemicals like diols, epoxides, alcohols, and carbonyl compounds. In this context, a chitosan (Cs) based heterogeneous catalyst, {Cu(II)[Cs-L1-L2]Cl2} was developed by the coordination of two different Schiff base ligands, L1 [Cs-HACP] and L2 [ANI-HACP] with the chitosan and followed by complexation with CuCl2·2H2O The prepared catalyst {Cu(II)[Cs-L1-L2]Cl2} was characterized by different techniques such as Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), Brunauer-Emmett-Teller (BET) surface area, Powder X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Ultraviolet visible near-infrared (UV–VIS-NIR), X-Ray photoelectron spectroscopy (XPS) and Density Functional Theory (DFT) studies. DFT studies suggest that {Cu(II)[Cs-L1-L2]Cl2} have octahedral geometry and +2 oxidation state of Copper is identified on the basis of XPS analysis. The Catalytic behavior of newly prepared heterogeneous catalyst {Cu(II)[Cs-L1-L2]Cl2} was studied for the tetralin oxidation using 70 % tert-butyl hydroperoxide [70 % TBHP]. Tetralin on oxidation gave 1-tetralol, 1-tetralone and some other products. A maximum conversion of 82.11 % tetralin with 10.42 % selectivity of 1-tetralol (T-lol) and 74.89 % selectivity of 1-tetralone (T-lone) was obtained after 5 h of reaction at 80 °C. The heterogeneous catalyst, {Cu(II)[Cs-L1-L2]Cl2}was easy to separate and recyclable. The catalyst was recycled seven times.

In silico anticancer activity of isoxazolidine and isoxazolines derivatives: DFT study, ADMET prediction, and molecular docking

This study presents a comprehensive analysis of six isoxazolidine and isoxazoline derivatives, employing a multifaceted approach that integrates Density Functional Theory (DFT), AdmetSAR analysis, and molecular docking simulations to explore their electronic, pharmacokinetic, and anticancer properties. Utilizing DFT analysis with the B3LYP-D3BJ functional and the 6-311++G(d,p) basis set, molecular geometries were optimized, and vibrational frequencies in the IR spectrum were evaluated, offering insights into the molecular structure and stability of the pharmaceutical compounds. Electrostatic potential maps were analyzed to predict functional group reactivity and protein-substrate interactions. Frontier Molecular Orbital (FMO) analysis and Density of States (DOS) plots revealed varying stability levels among the compounds, with 1b, 2b, and 3b exhibiting slightly higher stability. Chemical potential and hardness analyses highlighted stronger binding affinity for compounds 1b and 2b, suggesting stronger potential interactions. AdmetSAR analysis predicted favorable human intestinal absorption (HIA) rates for all compounds, with compound 3b showing superior oral effectiveness. Molecular docking and dynamics simulations were conducted targeting the receptor (PDB: 1JU6). Molecular docking simulations confirmed the high affinity of these compounds towards the target protein 1JU6, particularly compound 3b, which exhibited the most favorable binding energy, with a g score of -8.50 kcal/mol. Molecular dynamics simulations demonstrated the superior stability of ligand 3b over 1b and 5-FU over 100 ns, suggesting its potential for further study. The 3b-protein complex exhibited stability through hydrophobic and hydrogen bond interactions, with 3b demonstrating reduced solvent exposure compared to 1b and 5-FU. This study underscores the promising role of compound 3b in anticancer treatments, providing a solid foundation for future drug development and optimization efforts.